STK #E00052955,POTAIN SELF ERECTING CRANE EQUIPPED AS BELOW: TECHNICAL SPECIFICATIONS: - 4,000 KG / 8,818 LB. MAXIMUM CAPACITY - MAXIMUM RADIUS OF 40M / 131-FT. - MAXIMUM LOAD: 4,000 KG AT 13.2M / 8,818 LB. AT 43.2-FT. (4 PARTS) - MAXIMUM LOAD AT 40M: 1,000 KG / 131-FT : 2,204 LB. (4 PARTS) - POWER SUPPLY: 480V (+6%-10%) -60HZ MAST & CHASSIS EQUIPMENT: - 40M / 131-FT. BI-FOLDING, OFF-SETTABLE LATTICE JIB. OFF-SETTABLE TO 10 AND 20 DEGREES. - GALVANIZED FOLDING MAST. - 30M / 98-FT. MAXIMUM HOOK HEIGHT WITH JIB SET AT 0 DEGREES. - 40.4M / 131-FT. MAXIMUM HOOK HEIGHT WITH JIB SET AT 20 DEGREES. - 18 HPL 10 "HIGH PERFORMANCE LIFTING" WINCH COMBINED WITH THE PERMANENT 4 FALL REEVING WITH LINE SPEEDS UP TO 65M / 213-FT. PER MINUTE; A NEW "MICRO SPEED HOISTING" FUNCTION IS ALSO EMPLOYED. - 3 DVF 5 3.0 HP WITH VARIABLE FREQUENCY TROLLEY MOTOR WITH LINE SPEEDS UP TO 45M/ 148-FT. MIN WITH LOADS LESS THAN 1 METRIC TON. LINE SPEEDS UP TO 41M/ 135-FT. MIN ARE POSSIBLE WITH LOADS FROM 1000KG~4000KG / 2,204 LB. ~8,818 LB. - HPS 142 "HIGH PERFORMANCE SLEWING" WITH SPEED FEEDBACK OFFERS GREATER SLEWING BEHAVIOR. A NEW "DRIVE CONTROL" FUNCTION ALLOWS FOR 3 DRIVING PROFILES TO BE SELECTED VIA THE NEW RADIO REMOTE CONTROL BY THE OPERATOR. - NEW WIRELESS REMOTE CONTROL WITH "SMART SET-UP" AND "DRIVE CONTROL" INCLUDES INDICATORS FOR RADIUS, HEIGHT, LOAD, MOMENT, AND WIND SPEED. TWO REMOTE CONTROL LONGER LIFE BATTERIES WITH BATTERY CHARGER IN CONTROL PANEL CAPABLE OF RUNNING THE REMOTE FOR A FULL DAY'S OPERATION. - WIRED AUXILIARY REMOTE CONTROL WITH 15M CABLE CAPABLE OF RUNNING THE CRANE AT THE SAME SPEEDS AS THE WIRELESS REMOTE CONTROL IF THE BATTERIES SHOULD BECOME DEFECTIVE. - (1) 870 KG / 1,918 LB MANDATORY BALLAST BLOCK. - (15) 1,750 KG / 3,858 LB. CONCRETE BALLAST SLABS. - 4.5M X 4.5M / 14.76-FT X 14.76-FT CENTER TO CENTER OF OUTRIGGER PADS, WITH ADJUSTMENT UP TO 320 MM LEVELING POSSIBLE UP TO AN 8 DEGREE SLOPE WITH NEW SYSTEM TO ADJUST THE HEIGHT OF THE HIGH SOLE PLATES. ADJUSTMENT IS POSSIBLE TO 6 LOCKING POSITIONS OF THE SCREW JACK (250MM) PLUS 70MM OF THE SCREW. - "NEW" TOP SITE INTEGRATED ZONE INTERFERENCE SYSTEM WITH A TOTAL OF 7 ADJUSTABLE ZONES. - POWER CONTROL SYSTEM TO ADJUST THE CRANE TO THE POWER NETWORK; WHETHER IT IS A LOWER POWER GENERATOR SET OR A NETWORK WITH LIMITED POWER. - HUP ANEMOMETER WITH WIND SPEED INDICATOR - UL / CSA KIT - CENTRAL LUBRICATION - HIGH SOLE PLATES (H=400MM) PAINT SPECIFICATIONS: - CRANE PAINTED "MANITOWOC RED" COLO INCLUDES SET OF 4 DICA 36X36X2 PADS