Felling Trailers to Show Drop Deck Tilt Trailer at ARA Show 2026

Felling Trailers Inc. will exhibit the FT-10 DDPT Drop Deck Pan Tilt Trailer at The ARA Show 2026, scheduled for March 2 to 4, 2026, in Orlando, Florida. The trailer will be displayed in Booth 5232.

According to the company, the FT-10 DDPT is designed for transporting low-clearance equipment using a gravity-based tilt mechanism. The trailer is intended for equipment such as scissor lifts, forklifts, rollers and similar machines that require a shallow loading angle.

The trailer features a 79-inch width between wheelwells, a 12-foot deck length and a 21-foot overall length. A four-foot dovetail and 18-inch approach plate are used to reduce loading angles, which range from approximately seven to 13 degrees. The tilt bed operates from a center pivot point and includes a locking mechanism intended to simplify operation.

Construction details include fabricated steel pan sides measuring 10 inches high and an optional 3/16-inch steel floor plate. Tie-down provisions include six 5/8-inch straight D-rings and two corner tie-downs, along with an optional lockable bolt-on toolbox.

The FT-10 DDPT rides on two 6,000-pound axles with spring suspension and forward self-adjusting electric brakes on both axles. It has a GVWR of 9,980 pounds and a payload capacity of 7,380 pounds. LED lighting and a sealed wiring harness are standard, along with a seven-pole RV plug.

Felling Trailers plans to display the trailer throughout the show for attendees to review specifications and applications.